8.3
Electrical Connection
CAUTION!
Any electrical work required
to install this appliance
should be carried out by a
qualified electrician or
competent person.
WARNING!
This appliance must be
earthed.
The manufacturer declines
any liability should these
safety measures not be
observed.
The wires in the mains lead are coloured
in accordance with the following code:
A
B
C
D
E
•
A
- green and yellow: Earth
•
C
- brown: Live
•
D
- blue: Neutral
As the colours of the wires in the mains
lead of this appliance may not
correspond with the coloured markings
identifying the terminals in your plug,
proceed as follows:
1.
Connect the wire coloured green and
yellow to the terminal marked either
with the letter “E“ or by the earth
symbol or coloured green and
yellow.
2.
Connect the wire coloured blue to
the terminal either marked with the
letter “N“ or coloured black.
3.
Connect the wire coloured brown to
the terminal either marked with the
“L“ or coloured red.
4.
Check that no cut, or stray strands of
wire is present and the cord clamp
(
E
) is secure over the outer sheath.
Make sure the electricity supply
voltage is the same as that indicated
on the appliance rating plate.
5.
Switch on the appliance.
The appliance is supplied with a 13 amp
fuse (
B
). In the event of having to change
the fuse in the plug supplied, a 13 amp
ASTA approved (BS 1362) fuse must be
used.
WARNING!
A cut off plug inserted into a
13 amp socket is a serious
safety (shock) hazard. Ensure
that it is disposed of safely.
8.4
Ventilation requirements
The airflow behind the appliance must
be sufficient.
5 cm
min.
200 cm
2
min.
200 cm
2
CAUTION!
Refer to the assembly
instructions for the
installation.
9.
NOISES
There are some sounds during normal running (compressor, refrigerant circulation).
www.aeg.com
14
Summary of Contents for SCB61812LS
Page 1: ...USER MANUAL EN User Manual Fridge Freezer SCB61812LS ...
Page 17: ...ENGLISH 17 ...
Page 18: ...www aeg com 18 ...
Page 19: ...ENGLISH 19 ...
