L.
DYNAMICAIR function
4.2
Switching on
1.
Connect the mains plug to the power
socket.
2.
Press the appliance ON/OFF if the
display is off. The temperature
indicators show the set default
temperature.
To select a different set temperature
refer to "Temperature regulation".
If "dEMo" appears on the display, refer
to "Troubleshooting" .
4.3
Switching off
1.
Press the appliance ON/OFF for 3
seconds.
The display switches off.
2.
Disconnect the mains plug from the
power socket.
4.4
Temperature regulation
Set the temperature of the appliance by
pressing the temperature regulators.
Default recommended set temperature
is:
• +4°C for the fridge
• -18°C for the freezer
The temperature range may vary
between -15°C and -24°C for freezer and
between 2°C and 8°C for fridge.
The temperature indicators show the set
temperature.
The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
4.5
Switching on the fridge
To switch on the fridge it is enough to
press the fridge temperature regulator.
To switch on the fridge in the other way:
1.
Press Mode until the corresponding
icon appears.
The Fridge OFF indicator flashes.
2.
Press OK to confirm.
The fridge OFF indicator goes off and
the fridge compartment is switched on.
To select a different set
temperature refer to
"Temperature regulation".
4.6
Switching off the fridge
It is possible to switch off only the fridge
compartment maintaining the freezer on.
1.
Press Mode until the fridge
compartment indicator appears.
The fridge OFF indicator and the fridge
compartment indicator flash.
The fridge temperature indicator shows
dashes.
2.
Press OK to confirm.
The fridge OFF indicator is shown and
the fridge compartment is switched off.
4.7
Coolmatic function
If you need to insert in the fridge
compartment a large amount of warm
food, for example after doing the
grocery shopping, we suggest activating
the Coolmatic function to chill the
products more rapidly and to avoid
warming the other food which is already
in the refrigerator.
1.
Press the Mode until the
corresponding icon appears.
The Coolmatic indicator flashes.
2.
Press the OK to confirm.
The Coolmatic indicator is shown. The
fan activates automatically for the
function duration.
This function stops automatically after
approximately 6 hours.
You can deactivate the Coolmatic
function before its automatic end by
repeating the procedure or by selecting
a different fridge set temperature.
4.8
Holiday mode
This mode allows you to keep the fridge
compartment empty during a long
holiday period reducing the formation of
bad odours while the freezer
compartment can work normally.
1.
Press the Mode until the
corresponding icon appears.
www.aeg.com
10
Summary of Contents for SCE818E6NS
Page 1: ...USER MANUAL EN User Manual Fridge Freezer SCE818E6NS ...
Page 23: ......
