AEG SCE81928TS, User Manual

This mode switches off after

selecting a different

temperature.

4.10 

Frostmatic function

The Frostmatic function accelerates the

freezing of fresh food and, at the same

time, protects foodstuffs already stored

from undesirable warming.

1.

To activate this function press the

Mode button until the corresponding

icon appears.

The Frostmatic indicator flashes.

2.

Press the OK button to confirm.

The Frostmatic indicator is shown.

This function stops automatically after 52

hours.
To switch off the function before its

automatic end repeat the procedure

until the Frostmatic indicator turns off.

The function switches off by

selecting a different set

temperature.

4.11 

ChildLock function

Activate the ChildLock function to lock

the buttons from unintentional

operation.

1.

Press Mode until the corresponding

icon appears.

The ChildLock indicator flashes.

2.

Press OK to confirm.

The ChildLock indicator is shown.

To deactivate the ChildLock function,

repeat the procedure until the ChildLock

indicator goes off.

4.12 

DrinksChill function

The DrinksChill function is to be used to

set an acoustic alarm at the preferred

time, useful for example when a recipe

requires to cool down food products for

a certain period of time.
It is also useful when a reminder is

needed in order not to forget the bottles

placed in the freezer for fast cooling.

1.

Press Mode until the corresponding

icon appears.

The DrinksChill indicator flashes.

The Timer shows the set value (30

minutes) for a few seconds.

2.

Press the Timer regulator to change

the Timer set value from 1 to 90

minutes.

3.

Press OK to confirm.

TheDrinksChill indicator is shown.

The Timer start to flash (min).

At the end of the countdown the

DrinksChill indicator flashes and an

audible alarm sounds. Press OK to switch

off the sound and terminate the function.
To switch off the function repeat the

procedure until the DrinksChill goes off.

It is possible to change the

time at any time during the

countdown and at the end

by pressing the Temperature

colder button and the

Temperature warmer button.

4.13 

High temperature alarm

An increase in the temperature in the

freezer compartment (for example due to

an earlier power failure) is indicated by

flashing the alarm icon and freezer

temperature indicators, and sounding of

buzzer.
Press any button.

The buzzer switches off.

The freezer temperature indicator shows

the highest temperature reached for a

few seconds, then displays the set

temperature again.

The alarm indicator

continues to flash until the

normal conditions are

restored.

4.14 

Door open alarm

If the door is left open for a few minutes,

the acoustic alarm starts and alarm

indicator flashes.
The alarm stops after closing the door.

During the alarm, the acoustic signal can

be muted by pressing any button.

4.15 

DYNAMICAIR function

To switch on the function:

www.aeg.com

10