AEG SCN71800S1, User Manual

Problem

Possible cause

Solution

The door is not closed
correctly.

Refer to "Closing the
door".

The product temperature
is too high.

Let the product tempera-
ture decrease to room
temperature before stor-
age.

Many products are stored
at the same time.

Store less products at the
same time.

The temperature in
the refrigerator is
too high.

There is no cold air circu-
lation in the appliance.

Make sure that there is
cold air circulation in the
appliance.

The temperature in
the freezer is too
high.

Products are too near to
each other.

Store products so that
there is cold air circulation.

There is too much
frost.

Food is not wrapped cor-
rectly.

Wrap the food correctly.

The door is not closed
correctly.

Refer to "Closing the
door".

The temperature regula-
tor is not set correctly.

Set a higher temperature.

Upper or lower
square is shown in
the temperature Dis-
play.

An error has occurred in
measuring the tempera-
ture.

Call your service represen-
tative (the cooling system
will continue to keep food
products cold, but temper-
ature adjustment will not
be possible).

dEMo appears on
the Display.

The appliance is in dem-
onstration mode (dEMo).

Keep pressed approxi-
mately 10 sec. the OK but-
ton since a long sound of
buzzer is heard and the
Display shut off for a short
while: appliance start
works regularly.    

6.1 

Replacing the lamp

The appliance is equipped with a long-
life LED interior light.
Only service is allowed to replace the
lighting device. Contact your Service
Center.

6.2 

Closing the door

1.

Clean the door gaskets.

2.

If necessary, adjust the door. Refer
to "Installation".

3.

If necessary, replace the defective
door gaskets. Contact the Service
Center.

14 www.aeg.com