If the advice does not lead
to the desired result, call the
nearest brand-mark service.
7.2
Replacing the lamp
1.
Disconnect the plug from the mains
socket
2.
At the same time, with the fingers
expand up and down the transparent
cover and unhook it in the direction
of the arrows.
1
1
2
3.
Replace the lamp with one of the
same power and shape, specifically
designed for household appliances.
(the maximum power is shown on the
light bulb cover).
4.
Reassemble the lamp cover.
5.
Connect the plug to the mains
socket.
Open the door. Make sure that the light
comes on.
7.3
Closing the door
1.
Clean the door gaskets.
2.
If necessary, adjust the door. Refer to
"Installation".
3.
If necessary, replace the defective
door gaskets. Contact the After Sales
Service.
8.
INSTALLATION
8.1
Positioning
This appliance can be installed in a dry,
well ventilated indoor where the ambient
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Climate
class
Ambient temperature
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
Some functional problems
might occur for some types
of models when operating
outside of that range. The
correct operation can only
be guaranteed within the
specified temperature
range. If you have any
doubts regarding where to
install the appliance, please
turn to the vendor, to our
customer service or to the
nearest Service Centre
8.2
Electrical connection
• Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
• The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
www.aeg.com
12
Summary of Contents for SCS51600S1
Page 39: ...FRANÇAIS 39 ...
