50
Internal Par
ts
Storage shelves
The shelves can be removed for cleaning.
To permit storage of food packages of
various sizes, the shelves can be placed at
different heights.
To remove the internal shelf pull forward
until it can be tipped up or down and
removed.
Please do the same in reverse to insert the
shelf at a different height.
For better use of space, the front
halfshelves can lie over the rear ones.
Door shelves
To permit storage of food packages of
various sizes, the central door shelf can
be adjusted in height.
Gradually pull the shelf in the direction
of the arrows until it comes free, then
reposition as required.
For more thorough cleaning, the top and
bottom door shelves can be removed by
pulling them in the direction of the
arrows, then refitting them in position.
Hints
Saving Energy
Pay careful attention to where the cabinet is placed. See the section
Installation. When installed correctly the cabinet will consume less energy.
Try to avoid keeping the doors open for long periods or opening the doors
too frequently as warm air will enter the cabinet and cause the
compressor to switch on unnecessarily often.
If the ambient temperature is high, the thermostat knob is on the coldest
setting (higher numbers) and the appliance is fully loaded, the compressor
may run continuously, causing frost or ice to form on the evaporator. If this
happens, turn the knob to a warmer setting (lower numbers) to allow
automatic defrosting and so a saving in electricity consumption.
