AEG SKK5821HAF, User Manual

3.

Replace the used lamp with a new

lamp of the same power and shape,

specifically designed for household

appliances. The maximum power is

shown on the lamp cover.

4.

Install the lamp cover.

5.

Tighten the screw to the lamp cover.

6.

Connect the plug to the mains

socket.

7.

Open the door.

Make sure that the light comes on.

7.3 

Closing the door

1.

Clean the door gaskets.

2.

If necessary, adjust the door. Refer to

assembly instructions.

3.

If necessary, replace the defective

door gaskets. Contact the Authorised

Service Centre.

8. 

INSTALLATION

WARNING!

Refer to Safety chapters.

8.1 

Location

Refer to the assembly

instructions for the

installation.

To ensure best performance, install the

appliance well away from sources of heat

such as radiators, boilers, direct sunlight

etc. Make sure that air can circulate freely

around the back of the cabinet.

8.2 

Positioning

Install the appliance in a dry, well

ventilated indoors where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance.

Climate
class

Ambient temperature

SN

+10°C to + 32°C

N

+16°C to + 32°C

ST

+16°C to + 38°C

T

+16°C to + 43°C

Some functional problems

might occur for some types

of models when operating

outside of that range. The

correct operation can only

be guaranteed within the

specified temperature

range. If you have any

doubts regarding where to

install the appliance, please

turn to the vendor, to our

customer service or to the

nearest Authorised Service

Centre.

8.3 

Ventilation requirements

The airflow behind the appliance must

be sufficient.

5 cm

min.

200 cm

2

min.

200 cm

2

ENGLISH

11