ENGLISH
38
Connection
Note:
Please ensure that the plug connections are fi rm.
Bad connections may lead to poor sound quality.
1
2CH INPUT
Used for connecting an external sound source via
cinch (e.g. hi-fi video recorder).
2
5.1CH INPUT
Used for connecting an external sound source to a
5.1 output (e.g. DVD player).
3
AUDIO OUTPUT
Outputs on the right and left for connection of the
front loudspeakers (
FRONT RIGHT/ LEFT
).
Output for connection of the centre loudspeaker
(
CENTER
).
Output for connection of the surround loudspeakers
on the right and left (
REAR RIGHT/ LEFT
).
4
Mains lead
Correct connection is as follows:
When you have connected all loud speakers and devices
as described you can insert the mains plug of the sub-
woofer into a correctly installed 230 volt, 50 hertz power
socket.
Optional Connection of the Rear or
Front Loudspeakers to the Transmitter
1
SCAN
Button for activating the channel search
2 Standby control lamp
3
AC 230 V / 50 Hz
Mains lead
4
R OUT / L OUT (RIGHT/LEFT)
Loudspeaker output (right/left)
5
POWER ON / OFF
On/off switch
6
DC 5V IN Connection socket
7
AUDIO IN
3.5 mm jack socket audio input
8
FREQUENCY SELECT Button
For resetting the channel
9
POWER Control lamp
10
ON / OFF
On/off switch
11
VOLUME
Volume control
12
Foot
General Information
•
The audio signals are sent from the transmitter to the
receiver. The range within buildings is approximately
30 m. The range may be less, depending on the
ambient conditions.
•
The audio signals are transmitted in the 2.4 GHz
range.
•
Compression-free high sound quality with 0.5 ms
delay time.
•
The audio signals are processed digitally at a samp-
ling rate of 44.1 KHz and 16 bits.
•
If the transmission is affected by interference or poor
reception, the device activates the muting function
(see section on “Poor Reception Quality”).
05-SLS 4705 AEG neu2 38
14.02.2006, 9:02:35 Uhr
