AEG SR 4322 Instruction Manual Download

Page: 48 / 78

English

Headphone Socket (25)

Please use headphones with a 3.5 mm stereo jack plug;
these should be inserted into the PHONES socket. The
loudspeakers are then switched off .

Volume

The desired volume can be sent using the VOLUME /
regulator (8).

Switch-off

The machine is switched off when the function selector
switch (7) is turned to the OFF position. The time display
appears. Unplug the device.

USB Connexion (19)

This device has been developed in accordance with
the latest technical developments in the USB fi eld.
Unfortunately the large number of diff erent types of
USB storage media on off er today makes it impossible to
guarantee full compatibility with all USB storage media.
For this reason there may be problems in rare cases
with playing back from USB storage media. This is

not

malfunction of the device.

1. Turn the function selector switch (7) to the CD/MP3/

USB position.

2. Keep

the

PLAY/PAUSE button (20/1) pressed

down in order to select USB mode. USB appears in
the display.

3. Connect a USB storage medium. After a few seconds

the total number of tracks appears briefl y and then
playback begins. The current song and the letters

MP3 and USB appear in the display.

For operating instructions please see the section “Playing
CDs/MP3s”.

NOTE:

If there is no CD in the CD compartment at the same
time, the USB connection is automatically selected.

CAUTION:

Before you remove the USB storage medium turn the
function selector switch (7) to the RADIO position.

Card slot (21)

1. If you would like to play back data on an SD/MMC

card please insert it into the opening provided.

2. Turn the function selector switch (7) to the CD/MP3/

USB position.

3. Keep

the

PLAY/PAUSE button (20/1) pressed

down to select CARD mode. CARD appears in the dis-
play. After a few seconds the total number of tracks
appears and then playback begins. The current song
and

MP3 and CARD appear in the display.

For operating instructions please see the section “Playing
CDs/MP3s”.

NOTE:

• If a USB storage medium is connected it is not

possible to select the memory card.

• If there is no CD in the CD compartment at the

same time, the card slot is automatically selected.

Listening to the Radio

1. Turn the function selector switch (7) to the RADIO

position.

2. Use the band selector switch (5) to select the desired

frequency band.

VHF (Stereo) = FM ST., VHF = FM,

Medium wave = AM (Mono)

3. Tune in the desired station with the station adjust-

ment knob TUNING (4).

4. The FM.ST control lamp (14) only lights up when you

have selected FM stereo and the station is being re-
ceived in stereo quality. If reception is too weak and
there is noise on the station being received, this lamp
will fl icker. Where reception is bad we recommend
switching to FM.

5. For VHF/FM mode pull out the telescopic antenna (1)

and turn it to improve reception.

6. An aerial is integrated into the device for the recepti-

on of AM stations. The machine can be aligned to the
station by turning it. In this frequency band programs
are transmitted in „mono“ only.

Playing CDs/MP3

This is how you play a CD

1. Turn the function selector switch (7) to the „CD/MP3/

USB“ position. The time display appears.

2. Open the CD compartment (3) by pulling the lid

upwards by the tab (6).

3. Insert an audio CD with the printed side facing

upwards on to the central cone so that the CD clicks
into place and then close the lid of the CD compart-
ment.