AEG SR 4364 BT Instruction Manual Download

Page: 48 / 86

English

Storing stations:

1. Search for the required radio station with the /

TUN+ or the /TUN- button.

2. In order to store the radio station, press the

MEM/P-MODE button (17). The notification
“P 01” will blink in the display and “MEM” is
shown.

3. Use the

/ M+ /

/ / M- / ID3 buttons (8/12)

to select the desired memory location.

4. Press the MEM/P-MODE button. The radio sta-

tion will be stored.

NOTE:

“STEREO” will appear in the display once the station is
received with stereo sound.
If there is interference on the received station, we recom-
mend that you switch to MONO. Press the FM ST/MO
button (3 on the remote control) to switch between MONO
and STEREO.

Selecting stored radio stations

Press the

/ M+ / button (8) or the /M-/ID3 button (12)

repeatedly to scroll through the preset radio stations.

Playing CDs/MP3

1. Select the CD mode with the /FUNC button (20). The

following will appear in the display “CD”.

2. Open the CD tray (4) by pressing the PUSH TO OPEN

button (5).

3. Insert an audio CD with the printed side facing upwards

on to the central cone so that the CD clicks into place
and then close the lid of the CD compartment.

4. The CD will play from the first title. The elapsed playing

time and the current track will be shown in the display.
If available, the ID3 tag Meta data will additionally alter-
nately be shown as a continuous band with CDs in the
MP3 format.

5. In order to remove a CD, please press the /M-/ID3 but-

ton (12), open the CD compartment and lift the CD out
carefully.

Always keep the CD deck closed.

NOTE:

• If a disc is inserted the wrong way around, respectively

if no disc is inserted, then the message “READING” will
blink and “NO DISC” appears on the display.

• Playback of CDs produced by the user cannot be

guaranteed due to the large variety of software and CD
media available.

•

When the CD remains inserted:

The unit remembers

the current play position even if you switch off the unit
or switch to another mode. To play the CD again from
the start, press the /M-/ID3 button and then the

M+ / button.

Playing back music via Bluetooth

Bluetooth involves a technology for wireless radio connec-
tion of devices over a short distance. Devices with Bluetooth
standard are transmitting between 2.402 and 2.480 GHz in
the ISM band (

ndustrial,

cientific and

edical). Interference

can be caused for example by WLAN-networks, DAB radios,
cordless phones, or microwave ovens which work on the
same frequency band.
This device offers you the possibility to use a Bluetooth-
enabled device. The functional radius is limited to approx.
15 metres depending on the surroundings and the unit used.
If your playing device supports the A2DP profile (

dvanced

udio

istribution

rofile) and has a music-player function,

then you can also wirelessly transfer music to the device. The
A2DP profile involves a multi-vendor Bluetooth profile. By
streaming, stereo-audio signals are wirelessly transferred be-
tween the playing device (source) and the receiving device.
To be able to remotely control the source, the playback de-
vice must support the AVRCP profile (

udio

ideo

emote

ontrol

rofile).

Due to the different device manufacturers, models, and
software versions, a full functionality cannot be guaranteed.

Logging on devices (Pairing)

Before you listen to music via the unit, you must pair the
devices.
1. Ensure, that the Bluetooth function is activated in your

player (e.g. mobile phone). For this, refer to the operation
manual of your player.

2. Select the BLUETOOTH mode using the /FUNC but-

ton (20). The control light PAIR/STANDBY will blink blue.
This signalizes that the device is in pairing mode.

3. Choose the Bluetooth menu in your player and register

the device in your player. For this, refer to the operation
manual of your player. The device “AEG SR 4364 BT” will
show in your player as a selection.

NOTE:

• Only one playback device can be connected with

the device at one time. If the device is already con-
nected with another playback device, the device
will not appear in the BT selection menu.

• To disconnect an existing Bluetooth connection,

keep the

/ M+ / button (8) pressed down. The

PAIR/STANDBY control lamp flashes blue.

4. Now enter the password “0000” in your player, depend-

ing on the device manufacturers, model, and software
version.

If pairing was done successfully, the PAIR/STANDBY control
lamp lights up blue. For the further procedure, please refer
to the user manual of the playback unit. If possible, adjust the
volume of the external unit to a comfortable level.