10.
CARE AND CLEANING
10.1
Cleaning the filter
At the end of each cycle the
Filter
symbol comes on the display and you
must clean the filter.
The filter collects the fluff
during the drying cycle.
1.
Open the door. Pull the filter up.
2.
Push the hook to open the filter.
3.
Use a moist hand to clean both parts
of the filter.
4.
If necessary, clean the filter with a
vacuum cleaner. Close the filter.
5.
If necessary, remove fluff from the
filter socket and gasket. You can use
a vacuum cleaner. Place the filter
back inside the filter socket.
10.2
Emptying the water
container
Empty the condensed water container
after each drying cycle.
If the condensed water container is full,
the programme stops automatically. The
Tank
symbol comes on the display
and you must empty the water container.
To empty the water container:
1.
Pull the water container out keeping
it in a horizontal position.
2.
Pull the plastic connection out and
drain the water into a basin or
equivalent receptacle.
www.aeg.com
16