7.
Turn the lever until it clicks into
position.
8.
Put the filter back.
11.4
Cleaning the humidity
sensor
CAUTION!
Risk of humidity sensor
damage. Do not use
abrasive materials or steel
wool to clean the sensor.
To assure best drying results the
appliance is equipped with metal
humidity sensor. It is placed on the inner
side of the door area.
Over usage time the surface of the
sensor may get dirty what deteriorates
the drying performance.
We recommend to clean the sensor at
least 3 or 4 times or if you observe the
drop of drying performance.
To clean you can use harder side of dish-
washing sponge and bit of vinegar or
dish soap.
To clean the sensor:
1.
Open the loading door.
2.
Clean the surfaces of the humidity
sensor wiping off the metal surface
several times.
11.5
Cleaning the drum
WARNING!
Disconnect the appliance
before you clean it.
Use a standard neutral soap detergent to
clean the inner surface of the drum and
drum lifters. Dry the cleaned surfaces
with a soft cloth.
CAUTION!
Do not use abrasive
materials or steel wool to
clean the drum.
11.6
Cleaning the control
panel and housing
Use a standard neutral soap detergent to
clean the control panel and housing.
Use a moist cloth to clean. Dry the
cleaned surfaces with a soft cloth.
CAUTION!
Do not use furniture
cleaning agents or cleaning
agents which can cause
corrosion.
11.7
Cleaning the airflow slots
Use a vacuum cleaner to remove fluff
from the airflow slots.
www.aeg.com
20
Summary of Contents for T8DHC846B
Page 1: ...USER MANUAL EN User Manual Tumble Dryer T8DHC846B ...
Page 27: ......