To switch off the wireless connection , touch and hold down
Refresh and Delay Start buttons at the same time for 3 seconds.
The symbol:
appears on the display.
Appliance stores last connection configuration. To use wireless
features of the appliance the wireless connection must be in
mode.
To remove the wireless credentials, touch and hold down
Refresh and Delay Start buttons at the same time for 10 seconds.
The symbol:
appears on the display.
5.4 Remote control from application My AEG
One of the My AEG application features is to remotely control
appliance by:
• standard and extended programme selection
• programme start and stop
• programme status view
It works only when remote control is enabled.
in remote mode each programme and option selection from
extended application list is signalled by
symbol on the
display.
Remote control activation
To operate remotely the tumble dryer you must activate this
function on the appliance control panel.
To enable the remote control:
1. Check wireless connection between the appliance and smart
device.
19/60
WI-FI - CONNECTIVITY SETUP
Downloaded from www.vandenborre.be