Problem
1)
Possible cause
Remedy
The App cannot
connect to the
dryer.
Disrupted wireless signal.
Check if your smart device is con-
nected to the wireless network.
Check your home network and
router.
Restart the router.
Contact your wireless service pro-
vider if there are problems with the
wireless network.
A new home router has been in-
stalled or the router configuration
has been changed.
The dryer, the smart device, or
both, need to be configured again.
The App fre-
quently cannot
connect to the
dryer.
The wireless signal does not reach
the dryer.
Try to move the home router as
near the dryer as possible or con-
sider purchasing a wireless range
extender.
The wireless signal is disrupted by
microwave.
Turn the microwave off. Avoid us-
ing the microwave and the Remote
Control of the dryer at the same
time. The microwaves disrupt the
Wi-Fi signal.
1)
If there is an error message on the display (e.g.
E51
): Turn the tumble dryer off and on. Select a new
program. Push the Start/Pause button. If the appliance does not operate contact the service centre and
provide the error code.
2)
Follow the program description — see PROGRAMS chapter
3)
See chapter CARE AND CLEANING
4)
See HINTS AND TIPS chapter
5)
Note: After a maximum of 5 hours the drying cycle ends automatically.
17.
TECHNICAL DATA
Height x Width x Depth
850 x 600 x 630 mm (maximum 660 mm)
Max. depth with the appliance door open
1100 mm
Max. width with the appliance door open
950 mm
Adjustable height
850 mm (+ 15 mm - feet regulation)
Drum volume
118 l
Maximum load volume
8
kg
Voltage
230-240 V
Frequency
50 Hz
Total power
700 W
www.aeg.com
30