10
7. Replacing the lamp tubes/starter
The service life of the fluorescent tubes is on average 10,000 hours. If one tube needs replacing, both fluo-
rescent tubes must be replaced with new tubes of the same type. For this purpose, contact a retailer, an
authorised service centre or appropriately qualified personnel or contact the customer service.
The following tubes are approved as replacement:
• Philips – PL-L36W/865/4P
• The manufacturer’s tubes are available with the order number 162.942 from customer support
Warning
• For environmental reasons, do not dispose of the fluorescent tubes with the household waste. Dis-
pose of the unit at a suitable local collection or recycling point. Please contact the local authorities
responsible for waste disposal.
• Unplug the device, to avoid the risk of electrocution.
• Take care when handling fluorescent tubes to avoid the risk of cut injuries.
8. cleaning and care of the unit
The unit should be cleaned occasionally.
Important
• Ensure that no water penetrates inside the unit!
Before you clean the unit, always switch it off, unplug it and let it cool off.
• Do not wash the unit in a washing machine!
Clean using a damp cloth, to which you can apply a little detergent if necessary.
• Do not touch the unit with wet hands while it is plugged in; do not allow any water to be sprayed
onto the unit. The unit must be operated only when it is completely dry.
Do not use abrasive detergents and never immerse the unit in water.
Distance
Duration
Up to 20 cm
½ hour/day
Up to 40 cm
1 hour/day
Up to 60 cm
2 hours/day
3
Important instructions
When using the lamp, maintain the recommended distance of 20 - 60 cm between your face and
the lamp. The duration of the application depends on the distance:
Basically,
the closer you are to the source of light, the less time you should use it.
4
enjoying light over longer periods
Repeat your use of the lamp in the dark seasons for at least 7 successive days, or even longer,
depending on your individual needs. If possible, conduct the treatment in the morning hours.
5
switching off the lamp
Press the On/Off button. The tubes turn off. Pull the mains plug from the socket.
cAUTION!
The lamp is hot after being used. Let the lamp cool off first long enough before you put it
away and/or pack it up!
All manuals and user guides at all-guides.com
