22
12.2
Listen to the messages in the answering machine
When new messages are recorded on the answering machine, the
flashes on the handset display until all the new messages are played.
After a new message is played it will be saved as an old message
automatically unless it is deleted.
Old messages will be played after all new messages are all played.
t
Press
OK
and / to select “ANS. MACHINE”.
t
Press
OK
and / to select “MSG PLAYBACK”.
t
Press
OK
to start message playback through the earpiece and
the screen displays the date and time information of the message
received.
Note:
A
is placed at the centre of the bottom of the handset display to
indicate that it is a new message.
When a message has been played, the
will disappear and will not
be shown when you listen to this message again.
Note:
If there are no messages, the handset display will briefly show “00-00
00-00“ then return to “MSG PLAYBACK”.
t
During message playback, press / to increase or decrease the
message playback volume respectively.
t
Press
OK
and / to select “STOP”, “FORWARD”, “PREVIOUS”,
“DELETE” to perform the following functions during message
playback.
STOP
Stop the current message playback and return to the
ANS. MACHINE menu.
FORWARD Skip to play the next message. The date and time
information of the next message will display if there
is another message.
PREVIOUS
Repeat playing the current message from the
beginning. The date and time information of the
current message will display.
DELETE
Delete the current message and the next message
will be played.
