AEG WS22-230, Original Instructions Manual

16

16

WARNING!

The vibration emission level given in this information sheet has been measured in accordance with a standardised 

test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary 

assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for 

different applications, with different accessories or poorly maintained, the vibration emission may differ. This may 

significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched 

off or when it is running but not actually doing the job. This may significantly reduce the exposure level over the 

total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool 

and the accessories, keep the hands warm, organisation of work patterns.

tEchNIcAl dAtA 

Angle Grinder

WS22-230

Rated input

2200 W

Input voltage

220-240 V   50 Hz

Rated speed

6600 min

-1

D= Grinding disk diameter max.

230 mm

d= Grinding disk hole diameter

22.2 mm

  b= Cutting disk min. / max. thickness

1.9 mm / 5 mm

  b= Grinding disk min. thickness

6 mm

  D= Grinding surface diameter max.

230 mm

Thread of work spindle

M 14

Weight according EPTA-Procedure 01/2003

5.2 kg

Abrasive products: designation

type

Straight cutting-off wheels not reinforced

41

Straight and depressed-centre cutting-off wheels, reinforced

41

Depressed center grinding wheels (straight, dished)

27, 28

This product is not compatible with Type 1 wheel

Noise/Vibration Information

Measured values determined according to EN 60745. Typically, the A-weighted noise 

levels of the tool are:
Sound pressure level (Uncertainty K=3dB(A))

96.0 dB(A)

Sound power level (Uncertainty K=3dB(A))w

107.0 dB(A)

Wear ear protectors!

Vibration total values (triaxial vector sum) determined according to EN 60745
Surface grinding: Vibration emission value a

h,SG

8.7 m/s

2

Uncertainty K=

1.5 m/s

2