AEI DK-2890, User Manual



3) Example 3 -- EM Card + Secondary User 

Code

 :

i)  Programming :

       (a)       (b)         (c)                (d)                    (e)              (f)
(a) The card is programmed for operating Output 1
(b) The operation medium is EM Card + Secondary User Code
(c) Take the ID number 003 in Group 1 to store the Card & Code, which is one of the IDs in 000-999
(d) Put the card close to the reader. One beep confirms the reading
(e) Put Secondary User Code “2 4 6 8 0” after reading of card
(f) Press # to store the “Card + Secondary User Code”, two-beep confirms a valid entry

ii) Operation : (while the system is back to operation mode)

           (a)                       (b)                 (c)
(a) Read the EM card. Two-beep confirms the reading and 30 seconds waiting time is given for 

entry of the User Code, the Amber LED keeps flashing

(b) Key in the Secondary User Code “2 4 6 8 0”
(c) Confirm it with the # key. Output 1 activates

Read Card

Read Card

4) Example 4 -- EM Card + Common User Code:

i) Programming :

         (a)      (b)         (c)                (d)           (e)
(a) The card is programmed for operating Output 1
(b) The operation medium is “EM Card + Common User Code”
(c) Take ID number 004 in Group 1 to store the card, which is one of the IDs in 000-999
(d)       

(e) Press # to store the “Card”. Two-beep confirms a valid entry

ii) Operation : (while the system is back to operation mode) 

           (a)                              (b)                    (c)
(a) Read the EM card. Two-beep confirms the reading and 30 seconds waiting time is given for entry 

of the Common User Code, the Amber LED keeps flashing

(b) Key in the Common User Code “1 3 5 7” (the number programmed in “Location 03” for Output 

1 in the previous Example)

(c) Confirm it with the # key. Output 1 activates

Read Card

Common User Code

Read Card

Read the EM card. One beep confirms the reading. (No need to key in a Common User Code but 

there MUST be a Common User Code already recorded in Location 03.

(iii) Pause the real-time inhibition manually

The real-time inhibition can be stopped temporarily if require; such as the staff work overtime in 

office. The inhibition can be paused manually with Super User Code before or during the 

inhibition period. The pause is toggle and does not affect the real time period counting.

                                                   ---- Inhibition paused [Inhibit LED(Red) Flashing]

                                                   ---- Inhibition resumes [Inhibit LED(Red) ON]

NOTE:

The “INHIBIT” LED(Red) is flashing during the paused period; and it is ON after inhibition resumes.

(iv) Open door lock with Super User Code at anytime

The Super User code is valid all the time even in the inhibition period. This function does not 

affect the real time period counting.

                                                   ---- The door is open

Super User Code

 

Super User Code

 

Super User Code

 



Programming and Operation Examples:

(i) Set the starting and stopping time for the real-time inhibition period

    a) Set Inhibition Period from 12:30 PM (today) – 1:30 PM (same day) for lunch time:

    b) Set Inhibition Period from 6:30 PM (today) – 8:15 AM (next day) for office close:

NOTE:

1) The start and stop time figures are 24 hours basis. They are 4-digit figures from the smallest 

00:00

 to the largest 

23:59.

2) Entry of the two figure values from 

Small

 (Start) to

 Large

 (Stop) for the period of inhibition; the 

inhibition will start and stop in the same day. See 

example (a)

.

3) Entry of the two figure values from 

Large 

(Start) to

 Small 

(Stop) for the period of inhibition; the 

inhibition will start at the time of the day; thus stop in the next day. See 

example (b)

.

4) The keypad does not accept the “Start” and “Stop” times with same value. The two time figures 

must be different.

(ii) Clear the function of inhibition

Clear the time settings to stop the function of inhibition:

    

    

 