12
For example:
NOTE:
f)
Example:
g)
8321
0321
11223
31223
33221
53221
To command the Duress Function, enter the Duress Code(s).
The Duress Code(s) has double actions. It activates the Duress Output and at the same time activates
the Output 1 as like the normal User Codes in Group 1. The Duress Code(s) can always activate or
deactivate (in Start / Stop mode) Output 1, but cannot deactivate (reset) the Duress Output. ONLY the
User Codes in Group 1 can deactivate (reset) the Duress Output.
The Accelerated Code is the First Two Digits of the User code(s). If the Output has been programmed in
Start / Stop mode with Accelerated Code (Programming Option 42 for user codes in Group 1 and
Programming Option 52 for user codes in Group 2), it is possible to activate the Output with only the
First Two Digits of the User Code(s). Deactivating of the Output always requires the composition of the
Complete User Code(s) in their code Group.
Output 1 has been re-programmed to Start / Stop Mode with Accelerated Code (Programming Option 42)
with the Complete Code of 1st User Code in Group 1:
The Accelerated Code is:
2nd User Code in Group 1:
The Accelerated Code is:
Try to put some random false codes to the keypad to test its Safety. The keypad generates 5 beeps for
each unsuccessful code entry. The keypad locks itself during 15 minutes after 10 successive false codes
are entered. Normal operation will resume after 15 minutes expired, or, it can be reset with the Master
Code during the locking period.
The User Codes in Group 1
The Corresponding Duress Codes
----- Duress output activates (output switches to ground) & Output 1 activates for 1 second
-- Duress output activates (output switches to ground) & Output 1 activates for 1 second
-- Duress output activates (output switches to ground) & Output 1 activates for 1 second
------------- Output 1 starts
------ Output 1 stops
------------- Output 1 starts
--- Output 1 stops
------ Locking is reset and keypad resumes normal operation
If you want to delete User Number 3 in Group 2, press
If you want to delete User Number 2 in Group 3, press
0321 #
31223 #
53221 #
83 #
8321 #
11 #
11223 #
3289 #
2 3 #
3 2 #
8321
83
11223
11
D) DELETE USER (MULTI-USER MODE)
If you need to delete a user who has left the company or who no longer has authority to enter the protected area:
Set system in programming mode with the Personal Master Code and the
key
Enter the User Number (00-99 for output 1; 0-9 for output 2 & 3) and the
key to delete a user code
You may delete other user code(s) in this fashion
Exit the programming mode by pressing the
key after the work is done
1)
2)
3)
4)
*
3289 *
#
1 05 #
*
------------- The keypad is now in the programming mode
If you want to delete User Number 05 in Group 1, press
9
c)
d)
After the keypad is in programming mode, you may go to any Location for your programming options one by
one, please see Programming Options Summary Chart for the feature details.
You may make continuous programming until all desired options are programmed. Repeated programming at
the same Location is allowed if the previous entry was mistaken.
LOCATION 1
OPTION
LOCATION n
OPTION n
#
I
I
#
*
*
2 6854 #
3 9270 #
51 #
61 #
6854
9270
e)
1) Re uirement
3) Operate The Keypad
Exit programming mode with the
key after all your required options are programmed. The new information
that you have just programmed is saved.
a ) Single User Mode Operation
b) Change the factory-set Master Code 0000 to a Personal Master Code 3289
c) Set User Code 1 of 8321
d) Set User Code 2 of 6854
e ) Set User Code 3 of 9270
f ) Set Output 1 to Momentary Mode, 1 second
g) Set Output 2 to Start / Stop Mode
h) Set Output 3 to Start / Stop Mode
i ) Set the keypad to lock itself during 15 minutes after 10 successive false codes
-- Taking the data programmed above and other features in default value as reference
-- 6854 has been stored as User Code 2, for output 2
-- 9270 has been stored as User Code 3, for output 3
-------------- Output 2 has been set to Start / Stop Mode
-------------- Output 3 has been set to Start / Stop Mode
data
----------- Output 2 starts or stops
----------- Output 3 starts or stops
2) Programming
NOTE:
a)
-- Set the above requirement into the keypad:
a) **Enter the Single User Mode Command Code "8900" may not be necessary if the keypad was
already in Single User Mode.
b) In case of wrong entry during programming, cancel it with
key, or, wait 10 seconds, then re-try.
To command an output, only enter its user code. Press
is NOT required.
0000 *
8900 #
0 3289 #
1 8321 #
40 1 #
72 10 #
*
#
#
8321
------- System has been set in programming mode with the factory-set Master Code
------- System has been set for Single User Mode** (please see NOTE (a) below)
-- 3289 has been stored as the new Personal Master Code
Super User Code
-- 8321 has been stored as User Code 1, with Duress Code function, for output 1
--------- Output 1 has been set to Momentary Mode, 1 second
----- The keypad has been set to lock during 15 minutes after 10 successive false codes
----------------------- Keypad exits programming mode. All the above
are stored and ready for use
----------- Output 1 activates for 1 second
&
B) SINGLE USER MODE OPERATION
-- An Example
q
