background image

©ASCO Valve, Inc. 50 Hanover Road, Florham Park, New Jersey 07932

l&M V 6584 R16 sec1 

www.ascovalve.com 

Remove red cap or retainer from top of solenoid base 

sub-assembly. For 3-way construction with pipe adapter 

(Figure 3), remove pipe adapter, nameplate and solenoid. 

Omit steps 4 and 5.

Push down on solenoid: Then using a suitable screwdriver, 

insert blade between solenoid and nameplate/retainer. Pry 

up slightly and push to remove. NOTE: Series 8202O/H 

solenoids have a spacer between the nameplate/retainer and 

solenoid.

Remove solenoid from solenoid base sub-assembly.

Reassemble in reverse order of disassembly. Use exploded 

views for identification and placement of parts.

Torque pipe adapter to 90 inch-pounds maximum [10,2 Nm 

maximum]. Then make up piping or tubing to pipe adapter 

on solenoid.

3.  

4.      

5.  

6.  

7.  

Disassembly and Reassembly of Solenoids

Remove solenoid, see 

Solenoid Replacement.

Remove spring washer from solenoid base sub-assembly. 

For 3-way construction, remove pipe adapter and plugnut 

gasket.

1.  

2.  

Unscrew solenoid base sub-assembly from valve body.

Remove internal solenoid parts for cleaning or replacement. 

Use exploded views for identification and placement of 

parts.

If the solenoid is part of a valve, refer to basic valve instal-

lation and maintenance instructions for further disassembly.

Torque solenoid base sub-assembly and adapter to 175±25 

in-lbs [19,8±2,8 Nm].

3.  

4.  

5.  

6.  

ORDERING INFORMATION FOR ASCO 

SOLENOIDS 

When Ordering Solenoids for ASCO Solenoid 

Operators or Valves, order the number stamped on 

the solenoid. Also specify voltage and frequency.

lnstallation & Maintenance Instructions

1

3

Summary of Contents for E-STOP09






























Reviews: