background image

© 

AEI CORPORATION 2009

 

25 

  Please keep water and sprinklers away from heater especially while in use. 

 

  Do not use in a combustible atmosphere.  Keep the heater away from areas that have flammable 

liquids, gasoline, vapors, or explosives stored or used.  Do not use the heater inside your garage or 
other indoor work areas. 

 

  Do not hang clothing or any other combustible materials on or near heater when it is in operation. 

 

  Young children and pets should be closely supervised when the heater is in operation. 

 

  Never hook up the heater to an unregulated Natural Gas supply line. 

 

  Do not touch the emitter grid or reflector unless the heater has been turned off and cooled for at least 

40 minutes. 

 

  To avoid the possible risk of burns or possibly catching clothing or other combustible materials on fire, 

do not touch the heater anywhere close to the emitter grid or burner assembly while the heater is in 
operation 

 

  Please do not attempt to clean your heater with combustible or corrosive materials. 

 

  Minimum inlet pressure cannot exceed 1/2 psig. 

 

  Do not attempt to alter the heater in any manner whatsoever.  The unit has been designed to provide 

you with many years of trouble free service if maintained per our recommendations. 

 

  Inspect heater before each use.  If you find a damaged part, please replace the part with a genuine 

Patio Comfort

 part before using the appliance. 

 

  Do not attempt to use your heater without the proper factory supplied hose and regulator.  Use of 

unauthorized replacement parts may result in damage to the unit, cause improper operation, and 
performance, and may cause property damage or bodily injury. 

 

  The purchaser assumes all risk in the assembly and operation of this appliance.  Failure to follow these 

warnings and instructions can result in severe personal injury, property damage, or death. 

 

 

Do NOT attempt to move the heater while it is in operation. 

 

  Use this appliance in accordance with local codes and safety ordinances.  In the absence of local 

codes refer to ANSI standard Z223.1  

 

 

If you have any questions whatsoever about the assembly or operation of this product please 
contact your authorized 

Patio Comfort

 retailer or call us directly at 949-474-3070 or E-mail us at 

info@aeicorporation.com.

 This product has been designed and constructed to provide you and 

your family with many years of safe, convenient, outdoor comfort.

 

 

 
 
 
 
 
 

Summary of Contents for PATIO COMFORT NPC 05































Reviews: