Water/Methanol Injection V2
4
© 2020 AEM Performance Electronics
30-3300 Contents
Parts List:
Hardware Kit:
Quantity
Description
Part #
Quantity
Description
Part #
20 ft
High Pressure ¼” Nylon Hose
35-4500-20
60 in
Vacuum Hose (7/64")
8-161-120
1
1.15-Gallon Tank With Integral Fluid
Level Sensor 10”h x 8.5”w x 4.25”d
35-4542
36 in
3/8" High Temp Wire Wrap
8-169
6 in
Edge Protector
8-111-E
1
200 PSI Pump With Integral Fittings
5843-2S0D-
B744AM
1
1/8” Tee Fitting
35-2147
10
6” Zip Tie
8-113-E
1
Progressive Injection Module
35-4550
4
Bolt, Hex Head,
5/16-18 x 1.25”
1-2115
1
12 ft Wiring Harness
35-3451
4
Bolt, Hex Head,
8-32 x 1.5”
1-2116
8
Screw, Pan Head,
#8 x 1.0"
1-3048
Injector Nozzle Kit:
4
Screw, Pan Head,
#6 x 0.5"
1-3049
Quantity
Description
Part #
4
Nut, Nylock, 5/16-18
1-3055
1
Atomizing Pintle, Small (250 cc/min)
35-4554-1
4
Nut, Nylock, 8-32
1-2537
1
Atomizing Pintle, Medium (500
cc/min)
35-4554-2
12
Washer, #8 x 3/4"
1-3051
1
Atomizing Pintle, Large (1000 cc/min)
35-4554-3
4
Washer, #8 x 7/16"
1-3050
1
Nozzle Filter
35-4556
4
Washer, 5/16
1-3031-E
1
Nozzle Body
35-4557
4
Washer, Fender, 5/16
1-3054
1
Fitting, 1/4 Tube, Cliptype
35-4561
1
5mm Cockpit LED
35-4505
1
Spring
35-4562
2
Butt Connector,
14-16 AWG (blue)
8-360
1
Check Valve
35-4563
9
Butt Connector,
18-22 AWG (red)
8-361
1
Check Valve Seal
35-4570
4
Ring Terminal,
14-16 AWD (blue)
8-354
1
Retaining Clip
35-4565
