t)
Attach crank case breather tube and secure to
nipple on upper inlet pipe.
s)
Attach the check valve back to its original spot
near the firewall.
u)
Attach the other end of the crank case breather
tube to the nipple on the crank case and secure.
v)
Attach filter the inlet pipe. Check for clearance.
Secure filter.
Note: some models will have the
coolant reservoir behind the filter. These models
will require the coolant hose be extended using
the supplied barb fitting and 3/8” hose. Use the
¾” hose clamps to secure.
12