5
3. Installation of AEM
®
intake system.
a. When installing the intake system, do not completely tighten the hose clamps or mounting hardware until
instructed to do so.
a. Install the coupler on the throttle body with the
included hose clamps. Tighten the hose clamp on
the throttle body side at this time.
d. Secure the battery tray and ground cable with
the bolts removed from step 2d . Then move the
battery onto the tray.
b. Install the MAF sensor onto the AEM intake tube
with the supplied M4 fasteners.
c. Tighten the rubber mount to the air box mounting
hole, then install the AEM intake tube. DO NOT
TIGHTEN THE NUT UNTIL INSTRUCTED TO DO
SO IN THE LATER STEP.
