g)
Insert the inlet pipe into the coupler. Line up the
bracket to the installed rubber mount. See
step h
.
f)
Attach coupler and secure to the throttle body with
provided hose clamp. The other hose clamp should
be loose.
i)
Secure the bracket with provided washer and
serrated nut. Refer to diagram below.
h)
Once the bracket is lined up for fitment, tighten the
hose clamp at the throttle body securing the inlet
pipe.
Lock Nut
Fender Washer
Rubber Mount
Inlet Pipe Support Tab
Mounting
6
