BA 418-12 * 1.0 * 418_12_2_Sicherheit.fm
2-7
Safety 2
Machine travel on public roads/sites
• The specific national driving license is required.
• Observe the national regulations (for example, the road traffic
regulations) during machine travel on public roads/sites.
• Ensure that the vehicle is in compliance with the national regulations.
• In order not to blind other motorists, using the existing work lights
during vehicle travel on public roads/site is prohibited.
• When crossing for example, underpasses, bridges, tunnels, ensure
that the clearance height and width is sufficient.
• The attachment fitted onto the machine must be certified for travel on
public roads/sites (see for example, the registration documents).
• When transferring the machine on public roads, the attachment must
be brought into transport position and emptied if necessary.
• The mounted attachment must be equipped with the mandatory
lighting and protective devices.
• Take measures against unintentional operation of the operating
hydraulics.
• If the vehicle has different steering modes, ensure that the mandatory
steering mode is selected.
Stopping the engine of the machine
• Stop the engine only according to the Operator’s Manual.
• Before stopping the engine, lower the work equipment/attachment to
the ground.
Stopping and securing the vehicle
• Unbuckle the seat belt only after stopping the engine.
• Before leaving the machine, secure it to prevent it from rolling away
(for example, with the parking brake, suitable wheel chocks).
• Remove the starting key and secure the vehicle against unauthorized
operation.
Summary of Contents for 418-12
