AEM 418-12 Operator'S Manual Download

Page: 190 / 528

5-34

BA 418-12 * 1.0 * 418_12_5_Bedienung.fm

5 Operation

5.8

Heating, ventilation and air conditioning system

Heating and ventilation

The airflow is directed to the front window via

two air vents, and to the

legroom area via one air vent.
Each nozzle can be closed and directed separately.
The rotary switches

and

are located on the left on the instrument

panel.
The machine heater can be set to 2 operating modes:
• Ventilation
• Heating

Ventilation

1. Turn the rotary switch

to position

1 – 3

Heating

1. Turn the rotary switch

to position

1 – 3

2. Set rotary switch

to the required temperature:

= cold/

= warm

Rear window heating (option)

The operation (switch) is located in the front right next to the steering
wheel.

Information

The rear window heating independently switches off once the temperature
is reached (about 5 minutes)!

Fig. 212

Fig. 213

Rear window heating

Function

Press switch

position

➥

The indicator light in the
switch illuminates.

➥

Heating is in operation.

Summary of Contents for 418-12

















































































































































































































































































































































































































































































































































Search results

Summary of Contents for 418-12

Reviews:

Related manuals for 418-12

Brands by name

Popular brands

AEM 418-12, Operator'S Manual

Search results

Summary of Contents for 418-12

Reviews:

Related manuals for 418-12

Brands by name

Popular brands