5-60
BA 418-12 * 1.0 * 418_12_5_Bedienung.fm
5 Operation
Preparing attachments for continuous operation
1. Pick up the attachment and safely lock it
2. Lower the loader unit and apply the parking brake.
3. Stop the engine, but do
not
switch off ignition.
4. Release the pressure at the plug couplings
5. Switch off the starter and remove the starting key.
6. Couple the hose pipes of the attachment to the flat connector plugs
C/
1 and C/2
– see "Hydraulic connections: 3rd control circuit to the
.
Starting continuous operation
1. Start the diesel engine.
2. Disable the road-travel lock of the work hydraulics if it is enabled. To
do this: press the button
.
➥
Symbol
G/1
disappears in the display.
3. Press the button
(about 1 sec.).
➥
The LED in the push button illuminates.
➥
Symbol
G/3
appears in the digital display.
➥
The oil pressure is being built up; continuous operation is running.
Switching off continuous operation
1. Press the button
briefly.
➥
The LED in the push button goes out.
➥
Symbol
G/3
disappears in the display.
➥
Continuous operation is disabled.
Information
For safety reasons, the
continuous operation is secured with a restart
lock!
If the ignition if switched off and back on, the continuous operation is
automatically disabled and must be reactivated upon re-commissioning!
Information
In order to avoid excessively high hydraulic oil temperatures and
performance losses of the diesel engine, switch off of the continuous
operation if this is no longer necessary.
C/1
C/2
Fig. 243
1
3
C/2
C/1
SKID STEER
Summary of Contents for 418-12
