5-62
BA 418-12 * 1.0 * 418_12_5_Bedienung.fm
5 Operation
Important information on the function of the front socket
The power circuits can be used in inching operation or continuous
operation and only function with a switched on ignition.
A combination in inching or continuous operation is not possible!
It can be queried in the digital display what control circuit is activated. To
do this, briefly press button
in the digital display:
➥
Symbol
Q/1 or 2
appears for a few seconds and shows the active
control circuit.
Front power outlet operation
Information
The 1st control circuit in inching operation can be operated with the
button
on the joystick as well as with the button
(keypad).
Fig. 245
1
2
Design B
Operation in continuous operation
Switch on the 1st control circuit , to
do so press the button
➥
LED
Q/1
lights up.
➥
The electric power supply is
enabled as long as touch
button is pressed.
Switch on the 2nd control circuit
To do so, press the button
.
➥
LED
Q/2
lights up
➥
The electric power supply is
enabled as long as touch
button is pressed.
Continuous operation
Switch on the 1st control circuit
To do so, hold down button
for
about 2 seconds.
➥
LED
Q/1
lights up.
➥
The electric power supply is
continuously activated.
Switch off the 1st control circuit.
To do this, briefly hold button
➥
LED
Q/1
goes out and the
electric power supply is
disabled.
Switch on the 1st control circuit.
To do so, hold down button
for
about 2 seconds.
➥
LED
Q/2
lights up.
➥
The electric power supply is
continuously activated.
Switch off the 2nd control circuit.
To do this, briefly hold button
➥
LED
Q/2
goes out and the
electric power supply is
disabled.
Summary of Contents for 418-12
