BA 418-12 * 1.0 * 418_12_5_Bedienung.fm
5-67
Operation 5
Fitting an attachment onto a SKID STEER quickhitch facility
WARNING
Accident hazard if the attachments are not locked!
Failure to observe this can cause serious injury or death.
►
Check whether the lock pins
are visible on either side
in the
mounting bores of the attachment.
Attach the bucket and lock
1. Unlock the 3rd control circuit
– see "Unlocking/locking an attachment
to the quickhitch facility" on page 5-54
.
2. Drive the machine up to the attachment.
3. Lower the telescopic arm. To do this: push the joystick forward
C.
4. Tip the quickhitch facility forward. To do this, press the joystick to the
right
B.
5. Raise the telescopic boom until the mount of the quickhitch engages in
the mount of the attachment. To do this: pull the joystick backward
D.
6. Tilt the quickhitch facility in completely. To do this, press the joystick to
the left
A.
7. Lock the attachment. To do this, press the rocker switch
in the
joystick to the
left (E)
(seen in the travel direction).
➥
Symbol
appears in the digital display of the indicator.
➥
The lock pin engages in the mounting bores of the attachment and
is automatically secured against unlocking.
8. Ensure that lock pin can be seen on either side of the attachment.
Fig. 250
2
4.
3.
6.
5.
B
A
C
F
E
E
8.
Summary of Contents for 418-12
