BA 418-12 * 1.0 * 418_12_5_Bedienung.fm
5-165
Operation 5
Select the video system
The monitor supports the PAL and NTSC systems.
If it is not known what system the installed camera uses, select the "auto"
function.
Due to the format difference between PAL (4:3) and the monitor (16:9),
the subject may not be shown in the right format under certain conditions.
In addition, the image is compressed due to the compression of the 576
PAL image lines to the 480 LED- image lines. This effect can be
significantly reduced by choosing PAL 480.
Information
With PAL 480, only the 480 lines lying in the middle of the image are
shown. The lines outside of this zone are lost and are not shown on the
monitor.
Step
Push button
Activity
1
Switch on ignition and the video system if
necessary.
2
Press the screen menu button.
➥
The screen menu will appear on the
monitor.
3
Press the smaller button until the
"video system" line is selected.
4
Press the screen menu button.
➥
The setting is enabled.
5
Select the desired video system with the arrow
keys.
6
Press the screen menu button again.
➥
The selected system is saved.
➥
The setting is exited from.
7
Press the smaller button until the "close" line is
selected.
8
Press the screen menu button.
The screen menu is closed.
Summary of Contents for 418-12
