7-24
BA 418-12 * 1.0 * 418_12_7_Wartung.fm
7 Maintenance
Cleaning the engine and the engine compartment
CAUTION
Risk of injury due to hot and moving engine parts!
Hot and moving engine parts can cause injury.
►
Do not open the engine cover if the engine is running.
►
Let the engine cool down.
►
Wear protective equipment.
NOTICE
When cleaning the engine with a water or steam jet, humidity penetrating
the electronics can cause them to fail and damage the engine!
►
The engine must be cold.
►
Do not point the water jet directly temperature and oil pressure
switches, control devices may be exposed to direct jets of water.
►
Protect all electric parts, such as the alternator, connectors, relays, etc.
from humidity.
►
If the water jet is unintentionally pointed at electrical components, dry
them with compressed air and apply contact spray to them.
The following aids are recommended for cleaning:
• High-pressure cleaner
• Steam jet
Checking screw connection
• All threaded fittings must be checked regularly, even if they are not
listed in the maintenance plans.
• Retighten loose connections immediately. Refer to chapter “Technical
data” for the tightening torques.
Checking pivots and hinges
• Lubricate all mechanical pivot points on the machine (for example door
hinges, joints) and fittings (for example door arresters) regularly, even
if they are not listed in the lubrication plan.
• Check the accelerator and brake/inching pedals for dirt, clean them if
necessary, apply spray oil to the joints.
Summary of Contents for 418-12
