BA 418-12 * 1.0 * 418_12_7_Wartung.fm
7-55
Maintenance 7
Monitoring the hydraulic oil filter
The control lamp
on the indicating instrument monitors the dirt
accumulation of the return filter.
NOTICE
Indicator light
on the indicating instrument illuminates if the resistance
of the oil flow in the return filter is too high!
►
The filter element is dirty and must be replaced.
►
The filter element and the hydraulic oil may be replaced by an
authorized service center only!
Information
In cold weather indicator light
can illuminate immediately when the
engine is started. This is caused by increased oil viscosity. In this case
regulate the engine speed so that indicator light
does not illuminate.
Bear in mind the instructions concerning warmup
Hydraulic oil temperature monitoring
The monitoring of the hydraulic oil temperature is located in the digital
display
NOTICE
If the hydraulic oil temperature is too high, the symbol
57A
appears in the
digital display!
►
Check the hydraulic oil level and fill up missing oil
– see "Top off hydraulic oil" on page 7-57
.
►
The filter element or the hydraulic oil is dirty and must be replaced by
an authorized service center.
►
The hydraulic oil cooler is dirty and must be cleaned
Fig. 406
Fig. 407
A
Summary of Contents for 418-12
