BA 418-12 * 1.0 * 418_12_7_Wartung.fm
7-61
Maintenance 7
Checking the condition and age of hydraulic hoses
Important information for the owner of the machine:
The entrepreneur/owner of the machine must ensure that hose pipes are
replaced in appropriate intervals, even if no safety-relevant malfunctions
can been detected on the hose pipe.
Have flexible lines inspected by an expert (competent person) before the
first commissioning, and then at least once a year for safe working
condition.
Information
Observe the maintenance intervals
.
• Leakages and damaged pressure lines must be immediately repaired
or replaced by an authorized service center or after-sales personnel.
This not only increases the operating safety of your machine but also
helps to protect the environment.
• Have hydraulic hoses replaced by an authorized service center every 6
years from the date of manufacture, even if they do not seem to be
damaged.
In this respect, we also recommend that you observe all the relevant
safety regulations for hydraulic lines, as well as the safety regulations
regarding accident prevention and occupational health and safety in your
country. Also observe DIN 20066, part 5.
The date of manufacture (month or quarter and year) is indicated on the
flexible line.
Example:
• The indication “
2 Q/20
” means manufactured in the 2nd quarter of
2020.
2 Q/20
Fig. 411
Summary of Contents for 418-12
