BA 418-12 * 1.0 * 418_12_8_Betriebsstoerung.fm
8-27
Malfunctions 8
519120
04
S172: Switch for the crab steering mode lever - Short circuit to ground / low voltage
519120
26
S172: Switch for the crab steering mode lever – Outside valid values range
519120
28
S172: Switch for the crab steering mode lever - Open wiring or short circuit to positive
519123
03
S175: PTO shaft rear button - Short circuit to positive / voltage high
519123
07
S175: PTO shaft rear button - Mechanics not reacting / clamp activated
519123
26
S175: PTO shaft rear button - Outside the valid values range
519123
27
S175: PTO shaft rear button - Open wires or short circuit to ground
519303
02
SA 0x22: Front socket 14-pole, control unit machine control MVCU – incorrect or implausible
data
519303
07
0x22: Front socket, 14-pole, control unit machine control MVCU - mechanics not reacting /
clamp activated
519303
09
SA 0x22: Front socket 14-pole, control unit machine control MVCU – Timeout / abnormal clock
rate
519303
19
SA 0x22: Front socket 14-pole, control unit machine control MVCU – Data reception with active
error status
519351
09
AUX - XID 0x42: gear switch, CAN bus communication - timeout / abnormal clock rate
519351
19
AUX - XID 0x42: gear switch, CAN bus communication - data reception with active error status
519358
03
Y009: differential lock, lock changeover valve – short circuit against positive/high voltage
519365
06
Y016: 3rd control circuit / quickhitch plate, lock proportional valve - Current too high or short
circuit against machine ground
519365
26
Y016: 3rd control circuit / quickhitch plate , lock proportional valve - Outside valid values range
519366
06
Y016: 3rd control circuit / quickhitch plate, unlock proportional valve - Current too high or short
circuit against machine ground
519366
26
Y016: 3rd control circuit / quickhitch plate , unlock proportional valve - Outside valid values
range
519369
03
Y020: load stabilizer, changeover valve activation – short circuit to plus/high voltage
SPN
FMI
Description of severe errors for the drive electronics
Summary of Contents for 418-12
