BA 418-12 * 1.0 * 418_12_3_Einleitung.fm
3-55
Introduction 3
Warning sign: Read and observe the operator’s manual
In order to avoid injury or death:
1. Read Operator’s Manual and all safety signs before using or
maintaining machine.
2. Owner is responsible to ensure all users are instructed on safe use and
maintenance.
3. Check machine before operating. Service per Operator’s Manual.
4. Be aware and follow all local laws and regulations.
5. Before starting engine, ensure that the work hydraulics is in a locked
position and all joysticks are in the neutral position.
6. Sound horn to alert people.
7. Ensure bystanders and obstacles are clear of machine or its
attachments.
8. Do not use machine in space with explosive dust or gases or with
flammable material near exhaust.
9. Make sure all shields are in place and securely fastened.
10.Do not convey any people.
11.Never modify equipment.
12.Check for underground and overhead lines before taking the vehicle
into service.
13.Check the position of the attachment for travel direction before
operating the drive system.
14.Before leaving cabin, park the vehicle on level ground, lower all
equipment to ground, shut off engine, lock the work hydraulics, remove
the key.
Affixed:
on the central pillar on the right in the cabin.
Warning sign: Opening the sealing push-in cap of the coolant
reservoir
►
Burn hazard!
Never loosen or open reservoir cap when fluid is hot and
under pressure.
►
Always allow to cool before opening.
Affixed:
in the engine compartment on the air filter
Fig. 81
Fig. 82
Summary of Contents for 418-12
