BA 418-12 * 1.0 * 418_12_7_Wartung.fm
7-81
Maintenance 7
Check the ball hitch for wear
WARNING
Accident hazard in case of worn coupling pins, too much play in the
bearing or a worn base ring!
Can cause injury.
►
Check the ball hitch once a day for wear and play.
►
Apply grease to the base ring.
►
Have a malfunctioning ball hitch replaced by an authorized service
center.
Check the bearing and
longitudinal play A
of the coupling head:
• Move the uncoupled coupling head with force in travel direction.
Check the
height-wise play
of the coupling head:
• Open the coupling.
• Move the coupling head up and down with a suitable tool (mounting
lever).
➥
Play
A
in the center axis of the coupling head =
max. 3 mm
(0.12 in)
Check coupling pin
C/D
:
• Measure wear by means of a slide gage on the thickest section of the
coupling pin
C
.
➥
Diameter
C
may
not drop below 36.5 mm (1.44 in)
.
➥
Height-wise play
B
B max. 2.5 mm (0.1 in)
.
• Check pin play
D
in the base ring and thickness
E
of the base ring.
➥
Pin play
D max. 2.5 mm (0.1 in)
➥
Thickness of base ring
min. 7 mm (0.28 in)
Ball hitch (option) maintenance
Cleaning and lubricating the trailer coupling
Information
– see "Maintenance plan" on page 7-4
.
Specifications and capacities
– see chapter 7 " Vehicle fluids and
.
1. Lubricate all moving parts of the auto hitch.
Fig. 426:
36.5 mm
2.5 mm
7 mm
2.5 mm
36.5 mm
3.0 mm
A
B
C
E
D
Fig. 427
Summary of Contents for 418-12
