19
Time
Current time and date can be set manually or can be adjusted automatically via a time server.
Under „time source”, chose whether the time shall be set manually, automatically via network (internet)
or whether by an inserted server under “time server”.
Remark:
For the manual time registration, time source “manually” has to be chosen and to be
stored. After day, month, year, hour (24 hours) and minute have been set, they can be
taken over by the met[LOG) by pressing the button “activate”.
3.2. Configuration of the sensors
On the page “sensors” the COM interfaces can be activated, and the analogue/digital inputs can be
configured.
On the COM interfaces, protocols can be chosen.
Available for selection:
•
NMEA
•
rain[e] talker
•
rain[e] SDI-12 on RS485
•
MODBUS RTU
