22
Digital signals
Digital signals can be:
•
Status
•
Impulse
•
Frequency
If necessary, a debouncing software can be activated for the status or the impulse. Thereby the num-
ber of the permitted impulses per second will be limited to a maximum of 3 per second (3 Hz).
Status
Using digital signals, it can be adjusted, whether there is an active signal with low or high level or a
passive signal (e.g. relay or OC). At an active signal the voltage values for the high and low level can
be adjusted. Moreoverit can be chosen, whether the status is high active or low active.
ATTENTION !
Upon passive signal, the met[LOG] power supply will be interconnected as a switching
voltage.
