background image

ATTENTION 

An infrared camera is a sensitive optical measuring 

device. Pay special attention to the following points: 
1. Never aim the camera at the sun, a laser welding, or

other source of powerful thermal radiation.

2. Avoid exposure to dust with the lens flap open.
3. Do not touch the lens with your fingers.
4. Avoid jolting or dropping the camera.
If parts of the camera are damaged or not functioning as 

expected following failure to heed the warnings listed 

above, neither the manufacturer nor the distributor shall 

be held liable, and all costs incurred shall be borne 

solely by the operator. 

Symbols used on the instrument: 

The CE marking indicates compliance with the European 

"Low Voltage" and "Electromagnetic Compatibility" 

directives (2006/95/EC and 2004/108/EC). 
In the European Union, this product is subject to selective 

collection and recycling at end-of-life as waste electric 

and electronic equipment under directive 2002/96/EC 

(WEEE): this equipment must not be treated as an 

ordinary household waste. The spent batteries must not 

be treated as household wastes. Take them to the 

appropriate collection point for recycling. 
This product is designed to allow the recovery and 

recycling of most of its constituents. 

Summary of Contents for 1954













Reviews: