12
Simple Logger
®
II (Bluetooth Edition) Series
The
Control and Status Operation
of each LED is as follows:
GREEN LED
CONTROL
Starts a Recording
STATUS
Single-blink
Logger is in Standby Mode (and not recording)
Double-blink
Logger is in Record Mode
AMBER LED
CONTROL
Stops a Recording
STATUS
OFF
Logger is not in an Overload condition
Single-blink
One or more inputs are in an Overload condition
YELLOW LED
CONTROL
Clears the Alarm State (see § 3.6)
STATUS
OFF
No alarm has been seen on any input
Single-blink
At least one channel has seen an alarm at least once
Double-blink At least one channel is currently in an alarm condition
Fast-blink
Armed to clear alarm indication
RED LED
CONTROL
Erases the Memory (See § 3.7)
STATUS
OFF
No data in memory
Single-blink
Memory is partially filled
Double-blink
Memory is full
Fast-blink
Armed to erase memory
Slow-blink
Erase memory in process
BLUE LED
CONTROL
Turns the Bluetooth ON or OFF
STATUS
OFF
Bluetooth Disabled
Single-blink
Bluetooth Enabled
RED LED (Low Battery)
STATUS
OFF
Batteries OK
Single-blink
Low Battery Condition. Batteries should be replaced
