11
11 - TO ORDER
C.A 5210
.....................................................................
Cat #2116.74
C.A 5220
.....................................................................
Cat #2116.75
Supplied with a shockproof case, pair of leads with probes attached,
two 1.5V "AA" batteries and this user manual
Accessories
AC Current Probe Model MN251 (200A
AC
) ..............
Cat #2115.77
AC Current Probe Model MD303 (500A
AC
) ..............
Cat #1201.21
AC Current Probe Model SR652 (1000A
AC
) ............
Cat #2113.46
AC/DC MicroProbe Model K110
(from 100µA
AC/DC
to 300mA
AC
/ 450mA
DC
) .................
Cat #2111.73
AC/DC Current Probe model MR410
(400A
AC
/600A
DC
) ........................................................
Cat #1200.70
AmpFlex
™
Model 1000-24-1-1 (1000A
AC
) ...............
Cat #2112.39
Replacement leads ...................................................
Cat #2118.66
Soft carrying case ...................................................
Cat #2118.65
Replacement shockproof case ................................
Cat #2980.15
Fuse set of 10, 0.4A for C.A 5220 ...........................
Cat #2970.20
Fuse set of 10, 12A for C.A 5220 ............................
Cat #2970.21
12 - WARRANTY
Our guarantee is applicable for
three years
after the date on which
the equipment is made available (copy available on request).
13 - MAINTENANCE
For maintenance, use only specified spare parts.
The manufacturer will not be held responsible for any
accident occurring following a repair done other than
by its After Sales Service or approved repairers.
13-1 Replacing the batteries and the fuses
The multimeter must be disconnected from any electrical source.
The 1.5V batteries, as well as the 0.4A HPC and 12A HPC fuses for
model C.A 5220, are accessible at the back of the instrument.
Remove the lower half of the case after removing the three screws.
Replace the faulty elements, in accordance with :
polarity for the batteries
the value and the type of fuses
Fuse 0.4A HBC - 600V min (6.3 x 32mm)
Fuse 12A HBC - 600V min (10.3 x 38mm)
