6
4 - FREQUENCY
Connect the leads to the multimeter and connect in parallel to the
circuit to be tested.
Place the selector switch on the Hz voltage frequency function.
Automatic range selection: read the measured value
Note:
The bargraph is inactive on frequency measurement
If necessary, press the following buttons:
- MIN/MAX to read the min or max values
-
to light the display
Hz
100Hz
1kHz
10kHz
100kHz
(2)
400kHz
Resolution
0.01Hz
0.1Hz
1Hz
10Hz
100Hz
Accuracy
± 0.1% of Reading
± 10cts
± 4cts
± 8cts
± 20cts
Permitted
500V rms and 900V peak
overload
Operating
4V to 600V
range
(1)
(1) The RANGE button for this function selects the triggering threshold :
- 10mV for 100Hz, 1kHz and 10kHz ranges
- 400mV for 100kHz and 400kHz ranges
(2)
Note :
If the frequency applied is 99.99kHz, the decimal point oscillates between 9.999kHz
and 99.99kHz.
5 - CONTINUITY AND RESISTANCE
Never test a resistance on a live circuit
Connect the leads to the multimeter and to the terminals of the
circuit or the component to be tested.
Place the selector switch on the ohmmeter function
Ω
Ω
Ω
Ω
Ω
Press the
Ω /
Ω /
Ω /
Ω /
Ω /
button to change from the continuity sound
test to the measurement of resistances and reverse.
Automatic range selection: read the measured value
Freeze the value, by pressing the HOLD button.
If necessary, press the following buttons:
RANGE to select the range manually
MIN/MAX to read the min or max values
to light the display
