10
9-5-2 Electromagnetic compatibility: conforms to CE
!
Emission (EN 50081-1)
!
Immunity (EN 50082-1)
9-5-3 Mechanical protection
!
Degree of watertightness (IEC 529) : protection index IP 40
10 - TO ORDER
Use designations and references below
C.A 5240 ....................................................................... Cat# 2116.77
Sold with shockproof case, a pair of leads with probes attached,
a 9 V battery and this user’s manual
Accessories
!
AC current probe model MN 251 (200 A AC) ........... Cat# 2115.77
!
AC current probe model MD 303 (500 A AC) ........... Cat# 1201.21
!
AC current probe model SR 652 (1000 A AC) .......... Cat# 2113.46
!
AC/DC MicroProbe model K110
(from 100 µA AC/DC to 300 mA AC/ 450 mA DC) ....... Cat# 2111.73
!
AC/DC current probe model MR410
(400 A AC/600 A DC) ................................................... Cat# 1200.70
!
AmpFLEX model 1000-24-1-1 (1000 A AC) ............. Cat# 2112.39
!
Replacement leads ................................................... Cat# 2118.66
!
Soft carrying case ..................................................... Cat# 2118.65
!
Replacement shockproof case .................................. Cat# 2980.15
!
Fuse set of 10, 0.5 A ................................................. Cat# 2970.28
!
Fuse set of 10, 12 A .................................................. Cat# 2970.21
11 - WARRANTY
Our guarantee is applicable for three years after the date on which
the equipment is made available (copy available on request).
12 - MAINTENANCE
For maintenance, use only specified spare parts.
The manufacturer will not be held responsible for any
accident occurring following a repair done other than by its
After Sales Service or approved repairers.
12-1 Replacement of battery and fuses
The multimeter must be disconnected from any electrical
source.
!
Put the switch in the OFF position
!
Unscrew the captive screws and remove the lower half of the casing
!
Replace the worn battery with a 9 V battery (6F22 or 6LF22)
