12
Wire Mapper Pro Model CA7028
4.5 Service Detection
To detect an active data port, plug the unit into the port to be tested using
a short patch cable and press the
SERVICE / Vp
button.
The display will show the type of data connection or service present from
the following list:
Token Ring
10base T
No Service
Unknown Service
4.6 General Operation
WIRE MAPPER PRO
MODEL CA7028
Remote Unit
Structured Cable Tester
WIRE MAPPER PRO
MODEL CA7028
SERVICE / Vp
MAP /
LENGTH / Vp
• Set the instrument to the desired cable type and wiring scheme
(see § 4.2).
• Make sure no Telecom Network Voltages or other services are
detected (see § 4.4).
• Attach the instrument to one end of the cable to be tested
• Attach the remote unit to the other end of the same cable
• Press the
MAP /
button.
Structured Cable Tester
WIRE MAPPER PRO
MODEL CA7028
SERVICE / Vp
MAP /
LENGTH / Vp