16
Wire Mapper Pro Model CA7028
4.8.2 Reversed and Split Pair Fault
In the event of a
Reversed Pair
fault, the following is displayed:
ID1
FAILED
TIA568
L=94ft
Vp=71%
4 5 1 2 3 6 7 8 S
Reversed Pair
Pin 4 5
4 5 1 2 3 6 7 8 S
In the event of a
Split Pair
fault, the following is displayed:
ID1
FAILED
TIA568
L=94ft
Vp=71%
4 5 1 2 3 6 7 8 S
Split Pair
Pin 1 2 3 6
4 5 1 2 3 6 7 8 S
NOTE: For cables less than 6 ft (2m) in length the tester is unable to
distinguish a Split Pair condition.
In this event (cable too short), the following screen is displayed briefly,
before the screen to warn the user that a Split Pair test has not been car-
ried out.
* * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * *
Too Short for
Split Pair Test
