Simple Logger® Temperature Module Model L605
There are a several options to choose from. Some options
(
*
)
require an
internet connection.
•
Simple Logger, Version 6.xx
- Installs the Simple Logger
®
soft-
ware to the computer.
• *
Acrobat Reader
- Links to the Adobe
®
web site to download the
most recent version of Adobe
®
Acrobat Reader.
Acrobat Reader is
required for viewing PDF documents supplied on the CD-ROM.
• *
Check for Available Software Updates
- Opens the AEMC
Software update web site, where updated software versions are
available for downloading, if necessary.
•
View User Guide and Manuals
- Opens Windows
®
Explorer for
viewing of documentation files.
3.
To install the software, select
Simple Logger Software Setup
in
the top section of the Set-up window, then select
Simple Logger,
Version 6.xx
in the Options section.
4.
Click the
Install
button and follow the on-screen prompts to install the
software.
4.2
Recording Data
• If the temperature to be measured is not close to the ambient tempera-
ture, the response time will be slow. To avoid this, set the Model L605
or the temperature probe where you intend to record for about a half an
hour before turning the recorder on.
• Press the
PRESS
button on the top of the logger to begin the recording
session. The LED indicator will double-blink to indicate that the record-
ing session has started.
• When the recording session has been completed, press the
PRESS
button to end the recording. The LED indicator will single-blink to indi
-
cate the recording session has ended and the logger is in Stand-by.
• Connect the logger to the computer for data downloading. See the
User Guide on the CD-ROM for downloading.
