10
Simple Logger® Temperature Module Model L605
4.3
Using the Software
Launch the software and connect the RS-232 cable from your computer
to the logger.
NOTE:
The first time the program is launched you will need to select a
language.
Select
Port
from the menu bar and select the Com port (COM 1, 2 3 or 4)
you will be using (see your computer manual). Once the software automati
-
cally detects the baud rate, the logger will communicate with the computer.
(ID number of the logger and number of points recorded displayed).
4.3.1 The Function Command
The
Function
command allows you to select the correct units for the
recorded data.
When you click on Function, a pull-down window will appear with two
choices:
°
C or
°
F. This menu will only appear if a logger is connected to
the COM port.
Simply click and select the proper units from the menu that opens. Future
downloads will use the unit selected here for graphing as well.
