background image

16

 

Simple Logger® Temperature Module Model L605

Limited Warranty

The  Simple  Logger

®

  Model  L605  is  warranted  to  the  owner  for  a  period  of 

two

 

year

s

 from the date of original purchase against defects in manufacture. 

This limited warranty is given by AEMC

®

 Instruments, not by the distributor 

from  whom  it  was  purchased.  This  warranty  is  void  if  the  unit  has  been 

tampered 

with,  abused  or  if  the  defect  is  related  to  service  not  performed 

by AEMC

®

 Instruments. 

For  full  and  detailed  warranty  coverage,  please  read  the  Warranty 

Coverage  Information,  which  is  attached  to  the  Warranty Registration 

Card  (if  enclosed)  or  is  available  at  www.aemc.com.  Please  keep  the 

Warranty Coverage Information with your records.
What AEMC

®

 Instruments will do:

If  a  malfunction  occurs  within  the 

warranty

  period,  you  may  return  the  in

-

strument 

to  us  for  repair,  provided  we  have  your  warranty  registration 

information  on  file  or  a  proof  of  purchase.  AEMC

®

  Instruments  will,  at  its 

option, repair or replace the faulty material.

REGISTER ONLINE AT:

www.aemc.com

Warranty Repairs

What you must do to return an Instrument for Warranty Repair: 

First,  request  a  Customer  Service Authorization  Number  (CSA#)  by  phone 

or by fax from our Service Department (see address below), then return the 

instrument along with the signed CSA Form. Please write the CSA# on the 

outside of the shipping container. Return the instrument, postage or shipment 

pre-paid to:

Ship To:

  Chauvin Arnoux

®

, Inc. d.b.a. AEMC

®

 Instruments

15 Faraday Drive • Dover, NH 03820 USA

Phone: (800) 945-2362  (Ext. 360)

(603) 749-6434  (Ext. 360)

Fax:  (603) 742-2346 or (603) 749-6309

E-mail: repair@aemc.com

Caution:

 To protect yourself against in-transit loss, we recommend you insure 

your returned material.

NOTE: You must obtain a CSA# before returning any instrument.

Summary of Contents for L605





















Reviews: