Simple Logger® Temperature Module Model L605
CHAPTER 2
PRODUCT FEATURES
2.1
Indicators and Buttons
The Simple Logger
®
has one button and one indicator. Both are located
on the front panel. The
PRESS
button is used to start and stop recordings
and to turn the logger on and off.
The Red LED indicates the status of the logger:
•
Single Blink:
STAND-BY mode
•
Double Blink:
RECORD mode
•
Continuously On:
OVERLOAD condition
•
No Blinks:
OFF mode
1
2
3
4
(1) Start/Stop Button
(2) Inline Connector for External Sensor
(3) LED Indicator
(4) RS-232 Interface
LOGGER OPERATION:
1. Press to Start Logging
(Logging = Two Blinks)
2. Press to Stop Logging
(Stand-By = One Blink)
3. Press & Hold 5 sec. to Shut Off
(Off = No Blinks)
Warning: All Data will be Deleted!
Continuous LED Indicates Overload
!
INPUT
(10k @ 25°C)
!
RS-232
PRESS
!
®
I N S T R U M E N T S
SIMPLE LOGGER
®
TEMPERATURE MODULE L605
